Stereo icon, Illustrator Drawing Antique Camera Stereo Icon Design Tutorial
Make this vintage camera with basic shapes and use flat colors to get a very cool effect. Our camera was inspired by Leica M6. I recommend it to my friends and hope you can enjoy it.
Look at the effect picture first
1. How to create a new document and set the grid
Press Control-N to create a new document. Set the units to pixels, and then enter 800 x 600 for the width and height of the document. Then in the advanced options, select RGB, Screen (72 ppi), and make sure the Align New Objects to Pixel Grid box is activated before clicking OK.
激活网格(视图>显示网格)和 对齐网格 (视图>对齐网格)。您需要每隔10像素一个网格 ，因此只需按下 Control-K 转到 首选项，然后在 Guides&Grid 中将Gridline设置 为10 ，将细分设置为4。不要担心，网格可以帮助您轻松地工作，也可以通过按键盘快捷键Control-“启用或禁用网格 。
您可以激活“ 信息” 面板(“ 窗口”>“信息”)，以便预览形状的大小和位置。请记住 从 编辑>首选项>单位将测量单位设置为 像素。这将大大提高您的工作速度。
2. How to create a camera body
In order to give it shape, we will start from the indispensable part of our camera, its body. Make sure the mesh is active so that you can work easily and follow the tutorial without any problems.
Step 1
Click the center of the canvas with the Rectangle Tool (M), and then set the width to 300 pixels and the height to 170 pixels in the pop-up window. Fill # e3e3e3 with color and delete the stroke color.
Step 2
Click the canvas using the Rectangle Tool (M) to create a new rectangle of 130 x 20 pixels. Aligns the rectangle to the upper left corner of the main rectangle.
Select the two rectangles and apply Minus Front in the Pathfinder panel.
Step 3
Use the Rectangle Tool (M) to create a 30 x 18 pixel rectangle and place it in the upper left corner of the body. Use the Direct Selection Tool (A) to select the rectangle, and then remove the node in the lower left corner, leaving only one angle.
Select two numbers and apply Minus Front in the Pathfinder panel.
Step 4
Click the canvas using the Rectangle Tool (M) to create a new rectangle of 300 x 104 pixels. Place the rectangle on the body 16 px from below. Set the fill color to, no strokes# ebbd63
In the Transform panel, set an 8-pixel chamfer in the lower left corner.
Step 5
Click the canvas using the Rectangle Tool (M) to create a 278 x 44 pixel rectangle. Place it 126 px from the body.
Select two rectangles, and then use the shape generator tool (Shift-M) to subtract the rectangle formed in the upper left corner area.
Step 6
取得获得的矩形并将其复制(Control-C)并 粘贴(Control-F)。向后发送一次 (对象>排列>发送向后)。用键盘上的箭头键向下移动一次，并设置填充颜色 #c4c4c4。
Step 7
Click the canvas using the Rectangle Tool (M) to create a new rectangle of 2 x 46 pixels. Put it on the right, as shown in the figure below. Use color# c4c4c4
Use the Rectangle Tool (M) to make another 300 x 2 pixel rectangle and place it below, as shown in the second figure. Use the same fill color as before.
